How to Hide Your Wireless Network. Memorize or write down your wireless network's SSID or network name so you don't forget it. Go to your router's settings in a web browser, and navigate to the "Home/Wireless network/WLAN" page. Uncheck the option to broadcast the SSID to hide your network.
How can you stop neighbors from using your wireless internet? If you notice a device connected to your network that you don't recognize, change your password immediately. This way, that device will be disconnected from the network and will be asked to enter the new password.
Select Settings > Network & internet > Wi-Fi. On the Wi-Fi settings screen, select Manage known networks, and select the network you're connected to. On the Wi-Fi network screen, under Network profile type, select Public (Recommended) or Private.
If you want to disconnect the unauthorized users from your Wi-Fi, you can change your Wi-Fi password or remove these users from your Wi-Fi connected devices list.
Find the DHCP settings, "attached devices" area, or a similarly named section. The specifics vary by router manufacturer. Look through the list of connected devices and isolate those that aren't yours. If they're not immediately obvious, disconnect and/or turn off those you know belong to you.
Select "Wireless," then "Basic Wireless Settings" from the menus. Set "SSID Broadcast" to "Disabled" (if your router operates on a dual band, do this for both the 5GHz and 2.4GHz configurations).
Log into the web-based management interface of the cable modem router.
Go to Advanced > Wireless 2.4G or Wireless 5G > MAC. Filtering.
Select the wireless interface you want to configure and enable MAC Filtering. Select the filtering rule to either block (recommended) or allow the device(s) in the list.
Is it possible to set a data limit for each device that is connected to my WiFi network? Yes, just go to wifi settings page and enable traffic control or traffic bandwidth and configure the data limit. You might also need IP addresses of the devices to set up the uplink and downlink speeds.
Log in to your router dashboard, check for connected devices that aren't yours, and change the network password if you see any. Always use strong passwords, network encryption, disabled WPS, and nonbroadcast SSIDs to prevent unauthorized access.
When multiple devices use the same network, overcrowding occurs as they all compete with each other to connect to the same router. This means low quality or buffering during streaming, latency during gaming, and frustratingly slow browsing speeds.
Address: Suite 153 582 Lubowitz Walks, Port Alfredoborough, IN 72879-2838
Phone: +128413562823324
Job: IT Strategist
Hobby: Video gaming, Basketball, Web surfing, Book restoration, Jogging, Shooting, Fishing
Introduction: My name is Rev. Porsche Oberbrunner, I am a zany, graceful, talented, witty, determined, shiny, enchanting person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.